Currently, as the key raw material of artificial biological heart valve, bovine pericardium is mainly depend on import and has become a “bottleneck” challenge, greatly limiting the development of domestic biological heart valve. Therefore, the localization of bovine pericardium is extremely urgent. In this study, the pericardium of Sichuan yak was compared with that of Australian cattle in terms of fundamental properties and anti-calcification performance. The results demonstrated that the appearance and thickness of yak pericardium were more advantageous than the Australian one. Sichuan yak pericardium and Australian cattle pericardium had comparable performance in shrinkage temperature, mechanical test and anti-calcification test. This study preliminarily verifies the feasibility of substitution of Australian cattle pericardium by Sichuan yak pericardium and promotes the progression of bovine pericardium localization with data support.
ObjectiveTo isolate nucleus pulposus cells (NPCs) from the caudal and lumbar intervertebral disc of rat, and to identify the morphology and to compare the characteristics. MethodsThe whole spine was separated from 8-week-old Sprague Dawley rats under the sterile conditions. NPCs of different segments (lumbar group: L1,2-L6, S1; caudal group: C1,2-C17,18) were cultured by adherent cultivation approach. Cellular morphologic change was noted by HE staining and continuous observation under inverted phase contrast microscope. Besides, the aggrecan and collagen type Ⅱexpression were examined by toluidine blue and immunocytochemistry staining respectively. The total protein contents, senescence level, and the cell viability of passage 1-5 (P1-5) were detected. The growth curves of the P1 cells in lumbar and caudal groups were determined by cell counting kit 8. ResultsThe NPCs were isolated and identified successfully. The adherence time of the primary cells (the cell fusion reached 90%) in lumbar group was significantly longer than that in caudal group in primary generation (P<0.05). HE staining showed that cytoplasm was pink with the blue nucleus. Lumbar disc NPCs were spindle. The larger caudal disc NPCs were polygonal or irregular. Toluidine blue staining showed that the proteoglycan was stained as blue. In the cytoplasm of cells, collagen type Ⅱwas stained as brown surround the blue-black nucleus. The cell viability had no significant difference between lumbar and caudal groups and between different passages in the same group (P>0.05). The caudal disc NPCs reached their logarithmic growth phase after 3 days of culture, while the cells in lumbar segments did after 4-5 days of culture. The cell proliferation in caudal segments was more than that in lumbar segments at 3-9 days (P<0.05). The difference in the total protein contents was not significant between cells at P1-5 in 2 groups (P>0.05), and the caudal disc NPCs had higher protein contents than lumbar disc NPCs (P<0.05). There was no significant difference in cell senescence rate between cells at P1, P2, and P3 in 2 groups (P>0.05), but significant difference was shown in senescence rate between 2 groups in cells at P4 and P5 (P<0.05). ConclusionCaudal disc NPCs have a better status, which is more suitable for experiment as a seed cell than the lumbar disc NPCs in the same generation.
Total hip replacement (THR) is replacing the prosthesis stem similar to human bone that takes advantage of the material with both good mechanical properties and biocompatibility to the damaged articular surface. Thus it can not only alleviate or even eliminate the pain but also effectively maintain the joint stability and freedom and restore its normal performance. Finite element analysis was used in this study to establish a 3D model of artificial hip stem, and explore its fatigue properties of different materials to ensure the safety and reliability. The calculating obtained two results of different metal hip prosthesis, including lifetime and deformation. The minimum service life of titanium prosthesis reaches 568 million times, which satisfies ISO standards, while the stainless steel does not suit to be a prosthesis material.
Objective To summarize the influence of microstructure on performance of triply-periodic minimal surface (TPMS) bone scaffolds. Methods The relevant literature on the microstructure of TPMS bone scaffolds both domestically and internationally in recent years was widely reviewed, and the research progress in the imfluence of microstructure on the performance of bone scaffolds was summarized. Results The microstructure characteristics of TPMS bone scaffolds, such as pore shape, porosity, pore size, curvature, specific surface area, and tortuosity, exert a profound influence on bone scaffold performance. By finely adjusting the above parameters, it becomes feasible to substantially optimize the structural mechanical characteristics of the scaffold, thereby effectively preempting the occurrence of stress shielding phenomena. Concurrently, the manipulation of these parameters can also optimize the scaffold’s biological performance, facilitating cell adhesion, proliferation, and growth, while facilitating the ingrowth and permeation of bone tissue. Ultimately, the ideal bone fusion results will obtain. Conclusion The microstructure significantly and substantially influences the performance of TPMS bone scaffolds. By deeply exploring the characteristics of these microstructure effects on the performance of bone scaffolds, the design of bone scaffolds can be further optimized to better match specific implantation regions.
ObjectiveThe tissue engineered osteochondral integration of multi-layered scaffold was prepared and the related mechanical properties and biological properties were evaluated to provide a new technique and method for the repair and regeneration of osteochondral defect.MethodsAccording to blend of different components and proportion of acellular cartilage extracellular matrix of pig, nano-hydroxyapatite, and alginate, the osteochondral integration of multi-layered scaffold was prepared by using freeze-drying and physical and chemical cross-linking technology. The cartilage layer was consisted of acellular cartilage extracellular matrix; the middle layer was consisted of acellular cartilage extracellular matrix and alginate; and the bone layer was consisted of nano-hydroxyapatite, alginate, and acellular cartilage extracellular matrix. The biological and mechanics characteristic of the osteochondral integration of multi-layered scaffold were evaluated by morphology observation, scanning electron microscope observation, Micro-CT observation, porosity and pore size determination, water absorption capacity determination, mechanical testing (compression modulus and layer adhesive strength), biocompatibility testing [L929 cell proliferation on scaffold assessed by MTT assay, and growth of green fluorescent protein (GFP)-labeled Sprague Dawley rats’ bone marrow mesenchumal stem cells (BMSCs) on scaffolds].ResultsGross observation and Micro-CT observation showed that the scaffolds were closely integrated with each other without obvious discontinuities and separation. Scanning electron microscope showed that the structure of the bone layer was relatively dense, while the structure of the middle layer and the cartilage layer was relatively loose. The pore structures in the layers were connected to each other and all had the multi-dimensional characteristics. The porosity of cartilage layer, middle layer, and bone layer of the scaffolds were 93.55%±2.90%, 93.55%±4.10%, and 50.28%±3.20%, respectively; the porosity of the bone layer was significantly lower than that of cartilage layer and middle layer (P<0.05), but no significant difference was found between cartilage layer and middle layer (P>0.05). The pore size of the three layers were (239.66±35.28), (153.24±19.78), and (82.72±16.94) μm, respectively, showing significant differences between layers (P<0.05). The hydrophilic of the three layers were (15.14±3.15), (13.65±2.98), and (5.32±1.87) mL/g, respectively; the hydrophilic of the bone layer was significantly lower than that of cartilage layer and middle layer (P<0.05), but no significant difference was found between cartilage layer and middle layer (P>0.05). The compression modulus of the three layers were (51.36±13.25), (47.93±12.74), and (155.18±19.62) kPa, respectively; and compression modulus of the bone layer was significantly higher than that of cartilage layer and middle layer (P<0.05), but no significant difference was found between cartilage layer and middle layer (P>0.05). The osteochondral integration of multi-layered scaffold was tightly bonded with each layer. The layer adhesive strength between the cartilage layer and the middle layer was (18.21±5.16) kPa, and the layer adhesive strength between the middle layer and the bone layer was (16.73±6.38) kPa, showing no significant difference (t=0.637, P=0.537). MTT assay showed that L929 cells grew well on the scaffolds, indicating no scaffold cytotoxicity. GFP-labeled rat BMSCs grew evenly on the scaffolds, indicating scaffold has excellent biocompatibility.ConclusionThe advantages of three layers which have different performance of the tissue engineered osteochondral integration of multi-layered scaffold is achieved double biomimetics of structure and composition, lays a foundation for further research of animal in vivo experiment, meanwhile, as an advanced and potential strategy for osteochondral defect repair.
Objective To manufacture a poly (lactic-co-glycolic acid) (PLGA) scaffold by low temperature deposition three-dimensional (3D) printing technology, prepare a PLGA/decellularized articular cartilage extracellular matrix (DACECM) cartilage tissue engineered scaffold by combining DACECM, and further investigate its physicochemical properties. Methods PLGA scaffolds were prepared by low temperature deposition 3D printing technology, and DACECM suspensions was prepared by modified physical and chemical decellularization methods. DACECM oriented scaffolds were prepared by using freeze-drying and physicochemical cross-linking techniques. PLGA/DACECM oriented scaffolds were prepared by combining DACECM slurry with PLGA scaffolds. The macroscopic and microscopic structures of the three kinds of scaffolds were observed by general observation and scanning electron microscope. The chemical composition of DACECM oriented scaffold was analyzed by histological and immunohistochemical stainings. The compression modulus of the three kinds of scaffolds were measured by biomechanical test. Three kinds of scaffolds were embedded subcutaneously in Sprague Dawley rats, and HE staining was used to observe immune response. The chondrocytes of New Zealand white rabbits were isolated and cultured, and the three kinds of cell-scaffold complexes were prepared. The growth adhesion of the cells on the scaffolds was observed by scanning electron microscope. Three kinds of scaffold extracts were cultured with L-929 cells, the cells were cultured in DMEM culture medium as control group, and cell counting kit 8 (CCK-8) was used to detect cell proliferation. Results General observation and scanning electron microscope showed that the PLGA scaffold had a smooth surface and large pores; the surface of the DACECM oriented scaffold was rough, which was a 3D structure with loose pores and interconnected; and the PLGA/DACECM oriented scaffold had a rough surface, and the large hole and the small hole were connected to each other to construct a vertical 3D structure. Histological and immunohistochemical qualitative analysis demonstrated that DACECM was completely decellularized, retaining the glycosaminoglycans and collagen typeⅡ. Biomechanical examination showed that the compression modulus of DACECM oriented scaffold was significantly lower than those of the other two scaffolds (P<0.05). There was no significant difference between PLGA scaffold and PLGA/DACECM oriented scaffold (P>0.05). Subcutaneously embedded HE staining of the three scaffolds showed that the immunological rejections of DACECM and PLGA/DACECM oriented scaffolds were significantly weaker than that of the PLGA scaffold. Scanning electron microscope observation of the cell-scaffold complex showed that chondrocytes did not obviously adhere to PLGA scaffold, and a large number of chondrocytes adhered and grew on PLGA/DACECM oriented scaffold and DACECM oriented scaffold. CCK-8 assay showed that with the extension of culture time, the number of cells cultured in the three kinds of scaffold extracts and the control group increased. There was no significant difference in the absorbance (A) value between the groups at each time point (P>0.05). Conclusion The PLGA/DACECM oriented scaffolds have no cytotoxicity, have excellent physicochemical properties, and may become a promising scaffold material of tissue engineered cartilage.
Objective To explore the biomechanic effects of multi ple freeze-thaw on human allograft tendons. Methods Thirty tendons (24 flexor digitorum superficial is tendons and 6 flexor poll icis longus tendons) were harvested from 3 fresh cadaver donors and were divided into 6 groups randomly (fresh group; 1 cycle, 2 cycle, 3 cycle, 5 cycle, and 10 cycle freeze-thaw groups). There was 4 flexor digitorum superficial is tendons and 1 flexor poll icis longus tendon in each group. The structural and mechanical properties as well as viscoelastic change were estimated. Results The results of the structural and mechanical properties in 1 cycle, 2 cycle, and 3 cycle freeze-thaw groups were similar to that of the fresh group (P gt;0.05). The tendons in 5 cycle and 10 cycle freeze-thaw groups showed a significantly lower ultimate load and maximum stress when compared with those of fresh group (P lt; 0.05), but there was no significant difference in maximum tensile or maximum strain (P gt; 0.05). Moreover, the tendons in 5 cycle and 10 cycle freeze-thaw groups had a significant increase in viscoelastic properties when compared with fresh group (P lt; 0.05). Conclusion In the cryopreservation of tendon allografts, the cycle of freeze-thaw should not exceed 3 times. Multiple cycle freeze-thaw will weaken the biomechanical properties of tendon allografts, which make grafts easier to fatigue or even rupture.
In order to solve the problem of high cytotoxicity in vitro of nano-silver antibacterial gel, and the problem of large nano-silver particle size and size distribution, this study prepared nano-silver antibacterial gel with better biocompatibility and good antibacterial effect by using physical cross-linking method and using poloxamer as dispersant when prepared nano-silver. In this study, nano-silver was prepared by photo-initiator method and by adding poloxamer as a dispersant, and then UV-visible absorption spectrum test and scanning electron microscopy (SEM) test were carried out using prepared nano-silver mixture and particles after drying respectively. The gel was prepared through adjusting its pH value by using sodium bicarbonate, and then pH value test, SEM test for cross-section of gel, swelling ratio test, viscosity test, inhibition zone test and in vitro cytotoxicity test were carried out. The test results showed that the maximum absorption wavelength of prepared nano-silver, using poloxamer as dispersant and ultra-pure water as solvent, was 414 nm, and the average nano-silver size was about 60 nm. The prepared nano-silver using poloxamer as dispersant had smaller particle diameter and narrower particle size distribution than those using PVP as dispersant. Similarly, the prepared nano-silver using ultra-pure water as solvent also had smaller particle diameter and narrower particle size distribution than those using distilled water as solvent. The pH value of the prepared gel was between 5.8~6.1. The dried gel section had many holes. The water absorption of gel was fine and the viscosity of gel was fit to coat on the gauze. In addition, the prepared gel with nano-silver had greater ability to inhibit Escherichia coli and Staphyloccocus aureus at the concentrations of 24, 18 and 12 μg/mL. And the biocompatibility of the prepared gel with nano-silver was good when the concentration below 24 μg/mL. Based on the above features, the nano-silver antibacterial gel could be used in the treatment of burn or other wounds.
The study of mechanical properties on heart valves can provide an important theoretical basis for doctors to repair heart valves and prosthetic valve materials research. In this paper, we present the current status of the mechanical property study methods of heart valve, expound the methods and special requirements about uniaxial tensile test and biaxial tensile test of the heart valve, and further discuss several establishment methods of heart valve constitutive models. We also discuss the development trend of heart valve mechanics.
Clinical trial transparency, include clinical trial registration, unbiased reporting results and sharing individual participant data (IPD), is one of the most important revolutionary concepts following clinical epidemiology and evidence-based medicine in the medical field. Sharing IPD is a medical ethics issue reflected a new sense of worth and constructing new rules of clinical trials. Our viewpoint is that from the essential purpose of clinical research, IPD is a social public property. Sharing IPD is a one of the best ways for respecting the contributions of the participants, and one of the keys for changing face of clinical trials.