Objective To summarize the surgical technique and the effectiveness of Becker V-shaped lateral rotation osteotomy in total hip arthroplasty (THA) for Crowe type IV development dislocation of the hip (DDH). Methods Between January 2000 and December 2009, 18 patients (22 hips) with Crowe type IV DDH underwent THA. There were 3 males and 15 females with an average age of 54 years (range, 41-75 years). The unilateral hip was involved in 14 cases and bilateral hips in 4 cases. All patients had over anteversion of the femoral neck, with the acetabular anteversion angle of (21.28 ± 4.87)°, the femoral neck anteversion angle of (59.06 ± 1.44)°, and combined anteversion angle of (80.33 ± 1.55)°. All the patients had limb-length discrepancy, ranged from 1.0 to 3.5 cm (mean, 2.5 cm). Before operation, gluteus medius muscle strength was grade 2 in 17 hips and grade 3 in 5 hips; severe or moderate claudication was observed in 13 and 5 patients, respectively. Trendelenburg sign was positive in all patients. Preoperative Harris score was 30.00 ± 6.32. Cementless prosthesis was used. Becker V-shaped lateral rotation osteotomy and subtrochanteric shortening with overlapping femoral resection were performed, and proximal femoral shaft splitting was performed on 21 hips having narrow bone marrow cavity. Results All the cases achieved primary healing of incision. No complication of anterior dislocation, deep infection, nerve traction injury, or femoral uncontrolled fracture occurred. All the cases were followed up 3-12 years (mean, 8 years). Postoperative X-ray films showed that the initial fixation result of femoral prosthesis was excellent in 18 hips and good in 4 hips. Bone healing of osteotomy stump was obtained at 3-6 months (mean, 5 months) after operation. Affected limb prolonged for 2.5-3.5 cm (mean, 3.0 cm ) at 1 year after operation; limb-length discrepancy was 0.5-1.5 cm (mean, 1.0 cm). The gluteus medius muscle strength was restored to grade 4 in 5 hips and grade 5 in 17 hips. At last follow-up, 13 patients had no claudication, and 5 patients had mild claudication; Trendelenburg sign was negative in 15 cases and was positive in 3 cases; the Harris score was significantly improved to 91.89 ± 3.22; all showing significant difference when compared with preoperative ones (P lt; 0.05). At last follow-up, the acetabular anteversion angle, the femoral neck anteversion angle, and combined anteversion angle were (19.33 ± 4.49), (13.33 ± 5.70), and (32.67 ± 5.35)°, respectively, all showing significant differences when compared with preoperative ones (P lt; 0.05). No aseptic loosening, osteolysis, or rediolucent line was found around the femoral component. No implant subsidence, stem varus, or revision occurred. Conclusion Becker V-shaped lateral rotation osteotomy is a safe and predictable method to treat type Crowe type IV DDH.
Objective To compare the loss of anterior column heightand cervical Cobb angle with three different types of anterior cervical discectomy and fusion(ACDF). Methods A prospective randomized study was performed on 60 patients who had undergone ACDF with the autologous iliac crest graft (group A, n=20), the autogenous bone and the anterior cervical locking plates (group B, n=20), and Syncage-C filled with the local autograft reamings (group C, n=20) from January 1998 to January 2003. The patients diagnosed as having cervical radiculopathy (RP) and cervical spondylotic myelopathy (CSM) were indicated for ACDF. Of the patients, 41 were male and 19 female with a mean age of 57 years (range, 36-68) and their average course of disease was 6.2 months (range, 1-36). There were 36 one-level and 24 two-level fusions from C3,4 to C7,T1. Radiological measurements were performed on the cervical radiographs taken before operation, 7 days and 3 months after operation, and on the last day of the follow-up; then, the height and Cobb angle of the fused segment, functional restoration, and clinical outcome were evaluated in the three groups. Results The followup of more than 2 years (range,2-7) showed that the average loss of anterior column height and Cobb angle of the fused segments in groups A and B, which had not preserved the-endplate, hada greater increase than that in group C, which had preserved the endplate. Of the patients, 12 had autograft collapse, 3 autograft displacement, and 10 postural abnormality between the fused segments, most of which happened in groups A andB. The fusion rate was 93.3% (56 cases) according the strict arthrodesis critera; their excellent and good rate in the functional assessment was 83.3% (RP 90.4%, CSM 79.5%); the overall satisfactory (excellent and good) rates in groups A,B and C were 75%, 85% and 90%, respectively. Conclusion To increase the resistance to graft subsidence, which is a major reason for narrowness of the fused segments, and to maintain normal cervical curvature, we should improve our skills of bone grafting performance, preserve the endplate, carefully evaluate the degree of osteoporosis before operation, and use anterior cervical locking plate and /or fusion with Syncage-C when necessary.
ObjectivesTo systematically review the association between the SIX6 gene rs10483727 mutation and primary open angle glaucoma (POAG).MethodsPubMed, Web of Science, The Cochrane Library, CNKI, WanFang Data and VIP databases were searched to collect case-control studies on the SIX6 gene rs10483727 polymorphism and primary open angle glaucoma from inception to December 28th, 2018. Two reviewers independently screened literature, extracted data and assessed the risk of bias of included studies. Meta-analysis was performed by Stata 12.0 software.ResultsSeventeen case-control studies in 16 papers were included, involving 9 886 patients and 19 663 controls. The results of meta-analysis showed that rs10483727 polymorphism in SIX6 gene was associated with the risk of POAG in the Asians and Caucasians. However, no association was found in the Africans.ConclusionsThe current evidence shows that rs10483727 polymorphism in SIX6 gene is associated with the risk of POAG in the Asians and Caucasians.
Objective By observation of the diameter, progression rate, wall thickness, and the opening angle of the abnormal aortic of abdominal aortic aneurysm (AAA) in rats, to observe the effect of saturated hydrogen saline on residual strain of AAA rats, and to investigate its inhibition effect on AAA formation. Methods Twenty healthy male Sprague Dawley rats (weighing, 200-220 g) were randomly divided into 2 groups, which was made the AAA model by infiltration of the abdominal arota with 0.5 mol/L calcium chloride. Saturated hydrogen saline (5 mL/kg) or saline (5 mL/kg) was injected intraperitoneally in the experimental group or control group respectively, every day for 28 days. At 28 days, the diameter, progression rate, wall thickness, and opening angle of the abnormal aorta were mearsured. The aortic tissue was harvested for histological examination (HE staining and aldehyde-fuchsin staining). Results At 28 days after operation, the diameter of abnormal aorta in 2 groups were significantly higher than preoperative ones (P lt; 0.05), the progression rate in experimental group (65% ± 15%) was significantly lower than that in control group (128% ± 54%) (t=3.611, P=0.005). The opening angle and the wall thickness in experimental group were (88.78 ± 29.20)° and (0.14 ± 0.03) mm respectively, had significant differences when compared with the values in control group [(44.23 ± 28.52)° and (0.36 ± 0.05) mm respectively] (P lt; 0.01). The integrity and continuity of the aortic wall in experimental group were superior to that in the control group. Compared with the control group, the injury of elastic fiber in aortic wall and the infiltration of inflammation were all reduced. Conclusion Saturated hydrogen saline can maintain good mechanical properties and reduce dilatation of the aorta by increasing residual strain and reducing the remodeling of it.
Objective To establish the finite element model of varus-type ankle arthritis and to implement the finite element mechanical analysis of different correction models for tibial anterior surface angle (TAS) in supramalleolar osteotomy. Methods A female patient with left varus-type ankle arthritis (Takakura stage Ⅱ, TAS 78°) was taken as the study object. Based on the CT data, the three-dimensional model of varus-type ankle arthritis (TAS 78°) and different TAS correction models [normal (TAS 89°), 5° valgus (TAS 94°), and 10° valgus (TAS 99°)] were created by software Mimics 21.0, Geomagic Wrap 2021, Solidworks 2017, and Workbench 17.0. The 290 N vertical downward force was applied to the upper surface of the tibia and 60 N vertical downward force to the upper surface of the fibula. Von Mises stress distribution and stress peak were calculated. Results The finite element model of normal TAS was basically consistent with biomechanics of the foot. According to biomechanical analysis, the maximum stress of the varus model appeared in the medial tibiotalar joint surface and the medial part of the top tibiotalar joint surface. The stress distribution of talofibular joint surface and the lateral part of the top tibiotalar joint surface were uniform. In the normal model, the stress distributions of the talofibular joint surface and the tibiotalar joint surface were uniform, and no obvious stress concentration was observed. The maximum stress in the 5° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress distribution of medial tibiotalar joint surface was uniform. The maximum stress of the 10° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress on the medial tibiotalar joint surface increased. Conclusion With the increase of valgus, the stress of ankle joint gradually shift outwards, and the stress concentration tends to appear. There was no obvious obstruction of fibula with 10° TAS correction. However, when TAS correction exceeds 10° and continues to increase, the obstruction effect of fibula becomes increasingly significant.
ObjectiveTo review the researches of the role of the facet joint orientation (FJO) in degenerative spondylolisthesis (DS). MethodsRelated literature concerning the FJO in patients with DS was extensively reviewed and comprehensively analyzed in 4 terms of the basic concepts, measurement methods, the controversial etiology, and the clinical significance. ResultsThe multiplanar reformation of spiral CT is expected to become a new method of studying the FJO. The causal relationship between the sagittal FJO and DS is still controversial, but further prospective studies are needed to resolve this issue. The sagittal FJO is very important in the prevention of DS and the choice of surgery plan. ConclusionThe etiologic relationship between the FJO and DS need to be further studied.
ObjectiveTo investigate the value of smart phone Scoliometer software in obtaining optimal lumbar lordosis (LL) during L4-S1 fusion surgery. MethodsBetween November 2014 and February 2015, 20 patients scheduled for L4-S1 fusion surgery were prospectively enrolled the study. There were 8 males and 12 females, aged 41-65 years (mean, 52.3 years). The disease duration ranged from 6 months to 6 years (mean, 3.4 years). Before operation, the pelvic incidence (PI) and Cobb angle of L4-S1 (CobbL4-S1) were measured on lateral X-ray film of lumbosacral spine by PACS system; and the ideal CobbL4-S1 was then calculated according to previously published methods [(PI+9°)×70%]. Subsequently, intraoperative CobbL4-S1 was monitored by the Scoliometer software and was defined as optimal while it was less than 5° difference compared with ideal CobbL4-S1. Finally, the CobbL4-S1 was measured by the PACS system after operation and the consistency was compared between Scoliometer software and PACS system to evaluate the accuracy of this software. In addition, value of this method in obtaining optimal LL was validated by comparing the difference between ideal CobbL4-S1 and preoperative one with that between ideal CobbL4-S1 and postoperative one. ResultsThe CobbL4-S1 was (36.17±1.53)° for ideal one, (22.57±5.50)° for preoperative one, (32.25±1.46)° for intraoperative one measured by Scoliometer software, and (34.43±1.72)° for postoperative one, respectively. The observed intraclass correlation coefficient (ICC) was excellent [ICC=0.96, 95% confidence interval (0.93, 0.97)] and the mean absolute difference (MAD) was low (MAD=1.23) between Scoliometer software and PACS system. The deviation between ideal CobbL4-S1 and postoperative CobbL4-S1 was (2.31±0.23)°, which was significantly lower than the deviation between ideal CobbL4-S1 and preoperative CobbL4-S1 (13.60±1.85)° (t=6.065, P=0.001). ConclusionScoliometer software can help surgeon obtain the optimal LL and deserve further dissemination.
ObjectiveTo summarize the technique and effectiveness of double metatarsal osteotomy for treating severe hallux valgus with increased distal metatarsal articular angle (DMAA).MethodsBetween June 2014 and December 2017, 64 patients (94 feet) of severe hallux valgus with an increased DMAA were treated with the double metatarsal osteotomy (distal metatarsal Reverdin osteotomy+proximal metatarsal open wedge osteotomy) combined with Akin osteotomy and soft tissue surgery to correct the deformity. There were 10 males (15 feet) and 54 females (79 feet) with an average age of 44.5 years (range, 26-66 years), including 34 of unilateral foot and 30 of bilateral feet. The Maryland metatarsophalangeal joint score of the American Orthopaedic Foot and Ankle Society (AOFAS) was 54.3±7.4 and the visual analogue scale (VAS) score was 6.0±2.0. The pre- and post-operative AOFAS score, VAS score, DMAA, hallux valgus angle (HVA), first-second intermetatarsal angle (1-2IMA), and the first metatarsal length (FML) were recorded and compared.ResultsAll incisions healed by first intention. All patients were followed up 12-15 months, with an average of 13.2 months. The complications occurred in 4 feet, including 1 foot of hallux stiffness, 1 foot of numbness at the edge of the wound, 1 foot of metastatic metatarsalgia, and 1 foot of metatarsal bone necrosis. At 1 year after operation, the Maryland metatarsal joint score of AOFAS was 89.2±7.4, showing significant difference compared with preoperative score (t=18.427, P=0.000); and the effectiveness was rated as excellent in 78 feet, good in 12 feet, poor in 3 feet, and bad in 1 foot, with an excellent and good rate of 95.7%. The VAS score was 1.5±2.0, showing significant difference compared with the preoperative score (t=10.238, P=0.000). The X-ray films showed that the osteotomies achieved bony healing at 3 months after operation. There were significant differences (P<0.05) in HVA, 1-2IMA, and DMAA between preoperation and 6 months and 1 year after operation; but no significant difference was found in FML between preoperation and 1 year after operation (t=0.136, P=0.863).ConclusionFor the patients with severe hallux valgus with increased DMAA, the double metatarsal osteotomy can significantly relieve the clinical symptoms and improve the imaging parameters with less postoperative complications.
Purpose To examine the change of optic disc blood flow in primary open angle glaucoma(POAG) patients after cold provocation test and nifedipine administration． Methods Using Heidelberg retinal flowmetry (HRF),the blood flow of optic disc of glaucoma patients and normal control subjects were measured under basal condition, after cold provocation test,and after nifedipine administration. Results The mean optic disc blood volume and flow of POAG patients reduced from 27.1 and 545.4 to 22.3 and 452.4 after cold provocation test (Plt;0.05),and increased to 29.0 and 579.5 after nifedipine adminstration(Plt;0.05).The changes of mean optic disc blood flow of patients with a history of cold extremities show statistic significance compared with whom without such history (Plt;0.05)). Conclusion The changes of blood flow of optic disc in POAG patients may be influenced by cold stimuli and administration of nifedipine,and the history of cold extremities might be connected with the change of optic disc blood flow in POAG patients. (Chin J Ocul Fundus Dis,2000,16:85-87)
Objective To explore the best flexion angle of the transplantation tendon for fixing joint in simultaneously reconstructing of the anterior cruciate l igament (ACL) and posterior cruciate l igament (PCL) using semitendinosus tendon as autologous graft. Methods Twenty-four clean level New Zealand White rabbits [(aged 6-8 months, male or female, and weighing (2.5 ± 0.2) kg] were selected and divided randomly into 3 groups (n=8) according to fixation angle of the reconstructed l igaments. The bilateral semitendinosus tendons of hind legs were used to reconstruct the PCL and ACL of right hind leg, and the reconstructed l igaments were fixed at knee flexion angles of 90° (group A), 60° (group B), and 30° (group A). The rabbit general situation was observed after operation, and the specimens of the knee joints (including 10 cmdistal end and 10 cm proximal end) were harvested for testing extension and flexion, displacement, and internal and external rotation at 3 months after operation. Results All the rabbits survived to the end of experiment. There was no significant difference in maximal displacements of ACL and PCL among 3 groups (P gt; 0.05). The anterior and posterior displacements of shift in 3 groups were less than 1 mm, suggesting good stabil ity. The anterior displacement and the posterior displacement at 30° flexion and 90° flexion in group A were significantly larger than those in group C (P lt; 0.05). There were significant differences in internal rotation angle and external rotation angle between group A and group C (P lt; 0.05), and there was no significant difference among other groups (P gt; 0.05). Conclusion When simultaneously reconstructing ACL and PCL, the knee flexion angle of 60° for fixing the reconstructed l igaments can achieve the best effect.