ObjectiveTo analyze the clinical outcomes of 3D-printing assisting minimally invasive fixation of calcaneal fractures. MethodsThe study included 12 patients who were diagnosed with calcaneal fractures between October 2014 and May 2015. Using a real-size 3D-printed calcaneus model, the calcaneal locking plate could be preshaped before the operation and used with a minimally invasive approach to achieve rigid plate fixation just as with the lateral approach. Complications and surgery time were recorded and functional results were evaluated using the American Orthopaedic Foot Society ankle-metapedes score (AOFAS). The reduction of fracture was evaluated using the Bohler angle and Gissane angle. ResultsThere was no relevant postoperative complications. All fractures got bone union. The mean postoperative Bohler angle was (29.4±6.1) ° and the mean postoperative Gissane angle was (121.4±12.6) °. The difference in Bohler angle and calcaneal Gissane angle before and after the surgery was significant (P ＜ 0.01) . The mean postoperative AOFAS score was 75.2±5.4, and the fine/excellent rate was 83.3%. ConclusionWe believe this novel technique can be useful for the operative treatment of displaced intra-articular calcaneal fractures.
Objective To analyze the non-operation related risk factors of the wound complications by using lateral extensive L-shaped incision for open reduction and internal fixation of calcaneal fractures. Methods A retrospective analysis was made on the clinical data of 58 patients with closed calcaneal fractures (63 calcaneus) treated by using lateral intensive L-shaped incision for open reduction and internal fixation between September 2006 and August 2011. There were 52 males (56 calcaneus) and 6 females (7 calcaneus), aged 18 to 64 years (mean, 35 years). The causes of injury included fall injury in 53 cases (58 calcaneus), traffic injury in 5 cases (5 calcaneus). The mean time between injury and operation was 8 days (range, 3-22 days). According to Sanders classification, 4 calcaneus were rated as type II, 31 calcaneus as type III, and 28 calcaneus as type IV. Postoperative complications were observed and graded; 58 patients were divided into complication group (≥grade 2) and control group (lt; grade 2). The univariate analysis was used to analyze 18 factors which may lead to wound complications; multi-factor unconditioned logistic regression analysis was done for the factors showing significant difference. Results According to postoperative wound complications grading, 41 patients (46 calcaneus) were included in the control group, whose incision healed primarily, and 17 patients (17 calcaneus) in the complication group. In 17 patients of the complication group, 14 had skin necrosis or dehiscence, and 3 had superficial infection; they obtained healing after symptomatic treatment. The univariate analysis showed significant differences in combined spinal fracture, diabetes mellitus, and long-term smoking between 2 groups (P lt; 0.05). The logistic regression analysis revealed that combined spinal fracture was an independent risk factor for wound complications (95% confidence interval: 0.004-0.360, P=0.004). Conclusion Combined spinal fracture is an independent risk factor for wound complications after open reduction and internal fixation of calcaneal fracture using lateral extensive L-shaped incision.
ObjectiveTo investigate the anatomical characters of the sustentaculum tali (ST), accurate entry point and direction for the placement of ST screw from posterior subtalar joint facet to the constant fragment (CF) in calcaneal fractures.MethodsA total of 100 patients with calcaneal fractures performed ankle CT scans were enrolled between January 2016 and April 2016. According to the inclusion criteria, the clinical data of 33 patients were analyzed, including 18 males and 15 females, with a median age of 41.0 years (range, 18-60 years). There were 16 cases on left side and 17 cases on the right side. Three-dimensional (3D) calcaneal model was reconstructed by Mimics 17.0 software, and the ST anatomical references were measured, including the length of upper and lower edge, the length and height of the midline, the horizontal angle between the midline and foot plantar surface. The parameters of the optimal entry point position (P’ point) and placement angle of the ST screw were determined. The length of ST screw was also measured. The differences between males and females or left and right sides were compared.ResultsThe length of upper edge of the ST was (16.60±2.23) mm, lower edge (20.65±2.90) mm, midline (20.56±2.62) mm, and the height of midline was (9.61±1.36) mm. The horizontal angle between the midline and foot plantar surface was (23.43±3.36)°. The vertical distance from P’ point to the lowest point of the tarsal sinus was (3.09±1.65) mm, while the horizontal distance was (14.29±2.75) mm. The distance from P’ point to the apex of the lateral talus, subchondral bone of subtalar joint, calcaneocuboid joint was (11.41±3.22), (6.59±2.22), (34.58±3.75) mm, respectively. The horizontal angle between the ST screw and foot plantar surface was (–1.17±2.07)°. The anteversion angle of ST screw was (16.18±2.05)° and the length was (41.64 ± 3.09) mm. There were significant differences in the length of upper and lower edge, the length and height of the midline, the distance from P’ point to the apex of the lateral talus, subchondral bone of subtalar joint, and calcaneocuboid joint, and the anteversion angle and length of the ST screw between males and females (P<0.05). There was no significant difference in above all parameters between left and right sides (P>0.05).ConclusionAfter appropriate reduction of the calcaneal fractures, the entry point of ST screw was recommended at about 14 mm posterior and about 3 mm upper related to the foot horizontal line through the lowest tarsal sinus point; and the direction of ST screw placement was about 17° anteversion for males and 15° anteversion for females.
ObjectiveTo compare the clinical results between percutaneous poking reduction fixation and open reduction and internal fixation for the displaced Sanders Ⅱ type calcaneal fractures. MethodsA retrospective analysis was made on the clinical data of 122 patients with Sanders Ⅱ type calcaneal fractures between May 2007 and May 2012, who accorded with the inclusion criteria. The closed reduction and percutaneus Kirschner wire fixation were used in 61 patients (closed group), and open reduction and internal fixation were used in 61 patients (open group). There was no significant difference in gender, age, fracture side, weight, height, body mass index, the causes of injury, the fracture type, B?hler angle, Gissane angle, and the time from trauma to operation between 2 groups (P>0.05). The operation time, intraoperative blood loss, hospitalization days, wound complications, fracture healing time, American Orthopaedic Foot and Ankle Society (AOFAS) score, and radiographic results were compared between 2 groups. ResultsThe operation time, intraoperative blood loss, and hospitalization days in closed group were significantly less than those in open group (P<0.05). There was no deep infections in both group; wound dehiscence, skin flap necrosis, and wound infection occurred in 3 patients, 2 patients, and 1 patient of the open group, no wound complication happened in closed group, and there was significant difference in the incidence of wound complications between 2 groups (P=0.027). The patients were followed up 24-68 months (mean, 38.7 months) in the closed group and 26-66 months (mean, 38.7 months) in the open group. There was no significant difference in the fracture healing time between 2 groups (t=-1.562, P=0.121). The B?hler angle and Gissane angle at last follow-up were significantly improved when compared with preoperative angle in the closed group (t=-27.929, P=0.000; t=-26.351, P=0.000) and the open group (t=-32.565, P=0.000; t=-25.561, P=0.000), but there was no significant difference between 2 groups (P>0.05). AOFAS score showed no significant difference between 2 groups (t=-0.492, P=0.624). ConclusionFor the displaced Sanders Ⅱ type calcaneal fractures, the use of closed reduction and percutaneus Kirschner wire fixation or open reduction and internal fixation can both obtain satisfactory clinical function and radiographic results, but the former has the advantage of less trauma, shorter hospitalization time, and fewer wound complications.
Objective To evaluate the effectiveness of three-dimensional (3-D) printing assisting minimally invasive for intraarticular calcaneal fractures with percutaneous poking reduction and cannulate screw fixation. Methods A retrospective analysis was performed of the 19 patients (19 feet) with intraarticular calcaneal fracture who had been treated between March 2015 and May 2016. There were 13 males and 6 females with an average age of 38.2 years (range, 24-73 years). There were 3 open fractures and 16 closed fractures. By Sanders classification, 12 cases were type Ⅱ, 7 cases were type Ⅲ. By Essex-Lopresti classification, 13 cases were tongue type, 6 cases were joint-depression type. The time from injury to surgery was 1-10 days (mean, 4.7 days). A thin slice CT scan was taken of bilateral calcaneus in patients. By using the mirror imaging technique, the contralateral mirror image and the affected side calcaneus model were printed according to 1∶1 ratio. The displacement of fracture block was observed and contrasted, and the poking reduction was simulated. Calcaneal fracture was treated by percutaneous minimally invasive poking reduction and cannulate screw fixation. The B?hler angle and Gissane angle at immediate after operation and last follow-up was measured on X-ray films, and compared with preoperative measurement. The functional recovery was evaluated by American Orthopaedic Foot and Ankle Society (AOFAS) scores. Results The operation time was 25-70 minutes (mean, 45 minutes). The intraoperative blood loss was 10-40 mL (mean, 14.5 mL). All the incisions healed by first intention and had no relevant postoperative complications such as skin necrosis, nail tract infection, and osteomyelitis. All the patients were followed up 12-25 months (mean, 14.6 months). All patients obtained fracture healing, and the fracture healing time was 8-14 weeks (mean, 10.3 weeks). No screw withdrawal or breakage occurred during follow-up; only 1 patient with Sanders type Ⅱ fracture, whose calcaneus height was partially lost at 6 weeks after operation, the other patients had no reduction loss and fracture displacement, and no traumatic arthritis occurred. The B?hler angle and Gissane angle at immediate after operation and last follow-up were significantly improved when compared with preoperative ones (P<0.05), but there was no significant difference between at immediate after operation and last follow-up (P>0.05). The AOFAS score was 76-100 (mean, 88.2), and the results were excellent in 10 feet, good in 7, and fair in 2, the excellent and good rate was 89.5%. Conclusion 3-D printing assisting minimally invasive for intraarticular calcaneal fractures with percutaneous poking reduction and cannulate screw fixation can reduce the surgical trauma, improve the quality of reduction and fixation, and make the operation more safe, accurate, and individualized.
ObjectiveTo investigate the effectiveness of minimally invasive plate and medial supporting cannulated screw fixation via tarsal sinus approach in treatment of Sanders type Ⅱ and Ⅲ calcaneal fractures. Methods A clinical data of 46 patients with Sanders type Ⅱand Ⅲ calcaneal fractures met the selective criteria between March 2016 and March 2021 was retrospectively analyzed. The factures were fixed with minimally invasive plate and medial supporting cannulated screws via tarsal sinus approach in 20 cases (group A) and with minimally invasive plate in 26 cases (group B). There was no significant difference between groups in term of the gender, age, injury causes, fracture type and side, the time from injury to operation, and preoperative calcaneal length and width, B?hler angle, Gissane angle, and visual analogue scale (VAS) score (P>0.05). The operation time, intraoperative blood loss, hospital stay, and the interval between operation and full weight-bearing were recorded. The pain improvement of patients was evaluated by VAS scores before operation and at 48 hours after operation. The ankle joint function was evaluated by American Orthopaedic Foot and Ankle Society (AOFAS) score at 3 and 12 months after operation. Besides, the calcaneal length and width, B?hler angle, and Gissane angle were measured by X-ray films before and after operation. Furthermore, the difference (loss value) between 3, 12 months and 1 day after operation was calculated. Moreover, the fracture healing and healing time was observed. ResultsAll operations of two groups were successfully completed. The incisions healed by first intention, and no vascular/nerve injury or incision infection occurred. The operation time of group A was significantly longer than that of group B (P<0.05). There was no significant difference in the intraoperative blood loss, hospital stay, and the interval between operation and full weight-bearing (P>0.05). All patients were followed up 12-36 months (mean, 14.8 months). The VAS scores at 48 hours after operation were significantly lower than those before operation in the two groups (P<0.05); there was no significant difference in the difference of pre- and post-operative VAS score between groups (P>0.05). The AOFAS scores at 12 months after operation were significantly higher than those at 3 months after operation in the two groups (P<0.05); and there was no significant difference between groups at 3 and 12 months (P>0.05). X-ray films showed that the fractures of the two groups healed and there was no significant difference in healing time (P>0.05). There was no significant difference in calcaneal length and width and Gissane angle between groups at each time point (P>0.05), but there was significant difference in B?hler angle between groups at 12 months (P<0.05). The imaging indexes of the two groups significantly improved at each time point after operation when compared with those before operation (P<0.05). There was no significant difference between different time points after operation (P>0.05) in the imaging indexes of group A. There were significant differences in the calcaneal length, calcaneal width, and Gissane angle of group B between 12 months and 1 day, 3 months after operation (P<0.05), and there was no significant difference between 1 day and 3 months after operation (P>0.05). The differences in B?hler angle of group B between different time points after operation were significant (P<0.05). There was no significant difference between groups in the loss of all imaging indexes at 3 months after operation (P>0.05). The losses of calcaneal width, B?hler angle, and Gissane angle in group A at 12 months after operation were significantly smaller than those in group B (P<0.05), and there was no significant difference in the loss of calcaneus length between groups (P>0.05). ConclusionCompared with only minimally invasive plate fixation, the combination of minimally invasive plate and medial supporting cannulated screw fixation via tarsal sinus approach for Sanders type Ⅱ and Ⅲ calcaneal fractures has the advantages of less trauma, less incision complications, reliable fracture reduction and fixation, and good long-term stability.